Frenger Systems
Frenger Heating - Electric Radiant Heating & Convective Heating
Atrium
Atrium is Frenger’s lightest heating panel, and
it has the highest heating capacity. It is designed for integration
into a standard exposed-grid ceiling system, although it can also be
fixed directly to the soffit or free-hanging from the roof. Atrium
has a heating capacity of 684w/m² at 56.5dtK.
Atrium is ideal for use in large PFI schools and
hospitals, where it is essential to use products that can be
manufactured in high volumes and to close tolerances.
Atrium has also been performance tested in
accordance with EN 14037 - performance details available on request.
Modula
The Modula heating panel is a high performance heating
cassette with a smooth surface finish. The panel is produced using a
special process in which the copper pipe work is bonded to the
reverse of the panel plate using aluminium extrusion. The design and
process employed in the manufacturing of the Modula panel ensures
optimal performance and maximum heat exchange.
The panel is designed to be integrated into a
standard exposed-grid ceiling system, and is well suited to
installation in spaces where there is a need for high capacity
heating with an easy-to-clean, aesthetically pleasing panel; for
example, in hospital wards and corridors, school halls, classrooms
and offices.
Modula has a heating capacity of 437w/m² at
56.5dtK.
EcoStrip
EcoStrip is especially suitable for heating large
buildings, aircraft hangars and factory spaces. Units can be wall
mounted or free hanging and are available in lengths 4 - 120m. The
radiating surface is made up of steel panels, prefixed to 1/2 inch
steel pipework grids. Panels are available in either RAL 9010 White
or RAL 9002 Grey finishes as standard. The product has been
performance tested to EN 14037, the European standard for radiant
heating.
FrengerWarm
FrengerWarm is a system of custom made,
smooth-faced aluminium or steel panels manufactured to any
length/width/shape to suit the application. Tested to EN 14037,
FrengerWarm has a heating capacity of 450w/m² at 56.5dtK.
FrengerWarm is particularly suited for use in school gymnasiums and
classrooms, libraries and other public buildings where the heating
solution must be robust but sympathetic to the internal structure.
Electric Radiant Heating
Energostrip
The Energostrip is an electric radiant heating
panel
that will supply gentle, even and comfortable heat in various
applications from small stores or bathrooms to large industrial
units. The heaters can be used to provide general heating, or to
raise the temperature in certain areas (spot heating).
The heat is concentrated in the occupied area,
thus minimising energy losses through stratification of heated air.
The system is simple and inexpensive to install and maintenance
free.
Energostrip emits a gentle, pleasant black
radiant heat (long wave), not to be confused with high-temperature
shortwave infra-red heat, thus being ideal to use for general
heating of small or large areas of installation heights between 2 -
40m from floor height.
Frenger Systems can also offer the Energocassette,
an electric radiant heater suitable for integration in a ceiling
grid and a range of infrared heaters.
For further information regarding Frenger's full
product range, please visit our website: www.frenger.co.uk
Energostrip, Energocassette & EnergoInfra are
registered trademarks of Energotech, Sweden.
Request information:
Frenger Chilled beams
passive active chilled beams MSCB chilled ceilings
Technical information associated with:
Frenger Radiant Heating radiant heaters radiant ceiling panel
Technical information associated with:
Frenger Multiservice Chilled Beams passive chilled beams active chilled
beams |
