A.C. Plastic Industries

For over thirty years AC Plastic Industries Ltd has been a leader in the field of specialised plastics technology and engineering. The company's success has been greatly influenced by a steadfast commitment to the research and development of its products and its quality management systems which are approved to ISO 9001 : 2000. The company is based in Basingstoke, providing the following range of products:

Sectional Water Tanks

AQUASTOW Sectional Water Storage Tank

Panels are manufactured by the Hot Press Moulding process for optimum engineered precision and high performance finish at a closely controlled temperature of 140ºC.

Mechanised production process ensures guaranteed manufacturing tolerances of +/- 0.5mm.

Aquastow's precisely formulated sheet moulding compound provides a smooth, crevice-free panel surface that is impervious on all sides.

All Aquastow mouldings are UV stabilised conforming to BS 5734 : Part 5.

The Aquastow tank bracing design eliminates "point loads".

AQUATHERM Insulated Water Tank Panels

AQUATHERM Insulated Panels are supplied with a waterproof skin with a calculated heat transmittance of 0.489 w/m² ºC.

Tanks can be erected on screeded bases, steel beams or piers.

In order to meet individual needs of each installation design, a wide range of optional accessories are available including ball valve boxes, cat and mouse indicators, remote gauges, access door designs etc.

Approvals

Sprinkler Tanks

SPRINKLER TANKS to 1300m³ approved by BRE/LPCB (Approval No. 065a/01).

SECTIONAL WATER TANKS for Domestic Cold Water Storage tested and approved by the Water Regulations Advisory Service.

QUALITY ASSURED

DURABLE One Piece Water Storage Tanks

The water tanks are formed as one piece or split mouldings manufactured from unsaturated polyester resin, reinforced with glass fibre to BS/EN 13280:2001.
Tanks are unaffected by extremes of temperature.

Durable tanks are tested and approved by the Water Regulations Advisory Service.

With the awareness of legionella and water borne health hazards, the interior surfaces are smooth with generous radii to facilitate official and thorough cleaning.
The availability of the pre-insulated tanks enables stored water to be protected against heat gain, keeping water below the recommended 20ºC as protection against legionella.

Inner surfaces are Isophthalic gel coated approved by the Water Research Centre for storage of portable water.

Rectangular containers, with non-standard shapes and sizes are available to order.

Internal surfaces are smooth with generous radii, external, natural lay up finish.

To comply with the Water Supply (Water Fittings) Regulations 1999 all tanks are available with lids, vents, warning pipes and screened overflow.

Durable tanks will not react to any materials or jointing compounds approved for the use in water supply and storage. If chemicals are to be stored in our vessels, consult us prior to ordering for technical advice.

Web site

A.C Plastic Industries Limited
 Unit J Loddon Business Centre
Roentgen Road
Basinstoke
Hampshire
RG24 8NG

Email this company

Tel : 01256 329334
Fax : 01256 817862

AQUASTOW
Sectional Storage Tank sizes