 |
 Request
Surge Protectors Transient Voltage Surge protection information |
|
 Request
Information other products |
||
Category: Bowthorpe EMP Surge Protectors Transient Voltage Surge protectionBowthorpe EMP Tyco Electronics specialises in low voltage transient surge
suppression for mains power systems against the damaging effects of
mains-borne transients. Our extensive range provides protection against
huge potential losses from corrupted data and software, equipment
failure and structural damage caused by the secondary effects of
lightning strikes, or the switching of electrical inductive or
capacitive loads. Modular Distribution Transient Voltage Surge ProtectorsA range of distribution panel protectors for single and three phase power systems, featuring exceptionally high surge handling capabilities of 90,150 and 300kA. The MDSP is intended for high lightning exposure areas and critical systems where long life and low maintenance are required.
Plug-in Surge Protection ModulesOur SPM series comprises separate 1, 2, 3 or 4 modular DIN rail connection bases, and a comprehensive range of 6kA or 40kA replaceable plug-in protection modules with integral mechanical status indication, which simply plug-in. Connection bases are available with, or without, an additional remote status indication facility.
Distribution Surge ProtectorThese general purpose, hardwired single and three phase distribution panel protectors with 30kA of surge capacity and two stage (redundant) protection provide pre-failure indication. DSP600 Series ‘L’ & ‘N’ types have site fault condition indicators and relay contacts, which provide remote indication of protection status.
Sub Panel ProtectorsSurge Protection for sub-distribution panels which supply mission critical hardware such as mainframe computers, PABX systems and network file servers is available from the compact 10kA 6651C Protector. This hardwired, panel mounting surge protector with redundant protection and full protection status monitoring is available in single and three phase versions.
Spur ProtectorsThe 13 Amp rated Spur Protector (SPLB1/13) provides an economic means of preventing damage to sensitive electronic equipment on individual ring mains from the dangers of transients and surges derived from the switching of inductive or capacitive loads.
|
Tyco Electronics UK Limited |
|
Request information above Bowthorpe EMP Surge Protectors Transient Voltage Surge protection