Category: Hager Consumer Units Distribution Boards Klik Modular Plug
and socket Tebis TX Lighting Controls
Email Hager
Hager
Consumer Units Distribution Boards
At Hager our philosophy is to focus on providing high quality
products and solutions and to excel at customer service.
We invest heavily in research and development and all our products are
subjected to rigorous quality control procedures at every stage of
manufacture. They all have extensive independent approvals.
Hager Protection & Control - Hager products form a fully integrated
system for safe, efficient and effective protection and control of
electrical distribution systems. They are used for domestic, commercial
and light industrial applications.
Consumer Units - Our new consumer unit is the fastest and simplest to
install on the market. You will need just three tools. Our flush fit
option is also simple to install and provides you with an aesthetic
solution to meeting Part M of the building regulations. These units
offer up to 20 outgoing ways with a wide variety of incomers and
configurations. A wide variety of breakers and control devices are
available.
TP&N Distribution Boards - Invicta 63Mk2 has 7 primary TP&N distribution
boards and 13 incoming kits to provide 91 options from 20 standard
products. In addition, this modular offering allows extension boxes to
be mounted top and bottom or on either side of the boards for maximum
flexibility.
Panelboards - Invicta 125 – This range is for incoming circuits rated at
up to 400A with 4, 6, 8 or 12 triple pole outgoing ways. The MCCBs for
the outgoing ways are rated between 16A to 125A.
Invicta 250 – This range is for incoming supplies of up to 800A with up
to 18 outgoing ways rated at up to 250A.
Fuse Combination Switches - For the control and protection of individual
circuits a single MCCB, isolator or switch fuse can be provided in an
enclosure. The range extends from 20 to 800A.
Lighting Connection & Control - modular plug and socket interface
Provides a secure electrical and mechanical plug and socket interface
for lighting installations. The range is the undisputed market leader
for commercial lighting. Products include 36 plug-in ceiling rose
variants, prewired plugs, marshalling boxes ranging from 4 to 12
outgoing way and a wide range of occupancy and daylight detection
control sensors. Both Klik LDS and DCS can be used as a simple, cost
effective lighting control system to help meet the requirements of Part
L2.
Klik LDS - This marshalling box will save up to 50% of the installation
time for commercial lighting projects. It is available as a 4, 6, 8, 10
or 12 way marshalling box, with each socket outlet accepting either 3
pin or 4 pin plugs. The latter are used for emergency luminiares. The
system eliminates the need for on-site wiring of individual fittings and
each marshalling box can be used for either one or two lighting circuits
by simply removing a copper link.
When this system is used in conjunction with Klik sensors it can form a
simple but effective control system. These sensors combine occupancy
detection with a photocell, so lights can be switched in response to
both presence and natural light levels.
Klik Digital Connection System (DCS) - This is a simple to install and
commission lighting control system that combines occupancy sensing with
daylight linking to dim lights up and down. Such systems are reported to
save up to 70% of the running cost of lighting when compared to a
conventional switchstart lighting installation using wall switches. It
consists of a marshalling box that can distribute both power and data to
4,6,8 or 10 digital ballasts. The combined occupancy and daylight
linking sensor provides all the control for the luminaires. Klik DCS
prewired plugs provide the interface between the luminaire and the
marshalling box for both power and data. The system can also be divided
into two circuits for even greaterflexibility.
Tebis TX Lighting Controls
The new building services control system from Hager. Tebis TX
controls lighting, heating and other loads using the EIB/KNX bus system,
a proven technology. With easy installation and commissioning the system
offers major functional benefits to the end user and flexibility for
different control scenarios for the electrical engineer or architect.
The only limitation for the control options is your imagination.
A range of skirting and dado trunking in a variety of materials
including uPVC, Halogen Free Plastic, Aluminium and Steel. With a range
of sizes from 100mm x 68mm up to 210mm x 68mm there are a variety of
profiles available.
Hager offer complimentary specifier and installer training. Call our
National Sales Hotline 0870 240 2400
or visit www.hagergroup.co.uk to register your interest.
Technical information associated with:
Hager - Miniature Circuit Breakers
|
Email this company
Hager
Hortonwood 50
Telford
Shropshire
TF1 7FT
National Sales Hotline:
0870 240 2400
National Sales Faxline:
0870 240 0400
National Technical
Support Helpline:
0870 607 6677
 |
Request
Information other products