Category: Tyco Raychem T2 Underfloor Heating Tyco Raychem T2 Ramp
Heating Tyco Raychem T2 Product Selection
Email Raychem
Raychem Underfloor Heating & Ramp Heating - Product Selection
Selecting Underfloor Heating System
Select the right underfloor heating system using the table below:

Or use the design wizard on the website

Power Output Requirements
Selecting the power output of a system requires several
considerations:
- Heat losses for the area to be heated
- Floor finish i.e. Wood, tile, laminate, etc.
- Is this system the sole source of heating or complementary to an
existing system
It is advised that you contact the manufacturer (0800 969 013) to
ascertain the optimum output for your application.
Product Data Sheets
Full product specification and data sheets are available at:
www.tycothermal.com/uk/english/floor_heating/documentation/default.aspx

For a FREE complete technical and design brochure, call 0800 969 013
(Please mention that you have seen the Electrical Engineers Notebook)
Self-Regulating Technology - How does it work?
Self-regulating system, also known as “Intelligent” heating systems,
have the ability to adjust their power (and temperature) output
dependent on the ambient temperature. Therefore in colder ambient
conditions, more heat is produced and vice versa. The technology also
allows temperature variances within a single zone of underfloor heating.
Example: A self-regulating floor heating system is installed. The floor
finish is wood. In an area of the room, a thick rug is placed over the
floor. The self regulating system will reduce its power under the rug,
but maintain the required temperature in the surrounding floor. This
removes the risk of overheating the floor and damaging sensitive natural
floor finishes.
Project Design
Our design software will give you key information for your client and
contractor.
- Complete bill of materials
- Installation plan (2D & 3D version)
- Product part numbers for easy quotation
- Circuit sizes and layout
- Heat outputs per area

Typical 2D Installation Plan

Typical Building Materials Product Recommendation
Raychem Ramp Heating
For design criteria and assistance in the selection of appropriate
Systems and breaker ratings etc. please contact the Tyco Thermal
Controls Technical staff at the address below.
see
also
|