Marshall-Tufflex
Data and Power Cabling Management Systems
SnakeWay Cable Support System
SnakeWay is manufactured from ASTM A510 high
strength steel wire to form a unique, hand bendable cable support
system. Steel hoops welded to a central spine at 100mm intervals
provide easy entry and exit for cables at any point along the
length. Floor SnakeWay
Wall SnakeWay
Hanging SnakeWay - Single
Hanging SnakeWay - Double
Loading Capacity Data
Loading to give 1% deflection with support adjacent to connector.
Additional fastenings may be required to accomodate cable capacities
shown.
MT SUPERTUBE
 MT
SUPERTUBE is an LSOH conduit with a unique three layer LSOH
polyethylene and aluminium construction that offers excellent EMI
cable protection and assists in conforming to the EMC directive in
regard to EMI shielding. It can be supplied in standard 3-metre
lengths or in single coil lengths up to 100 metres. 20mm and 25mm
fittings available in metal, polycarbonate and PVC-U.
Technical Specifications Impact Resistance:
manufactured to comply with BS EN 50086 Nail
Penetration: tested to comply with test methods of BS 8436 (where
applicable)
Series 507 Powertrack
The 63Amp MT Powertrack System caters for single
phase standard, UPS and low noise (CE). The 50 Amp System caters for
three phase or dual applications where both standard and low noise
(CE) power are run together within the same track system using
reduced floor area and installation time.
Powertrack comes in lengths of 1.2m, 1.8m (only available in 300mm
pitch) 2.4m or 3.6m with tap-off positions provided at 150mm, 300mm
or 600mm. The system is therefore very versatile and suitable for
high through to low density requirements – so access to power need
never be a problem. Both snap-fit couplers and
tap-offs are key and colour coded to avoid any possible errors
during assembly. For maximum safety each operates a shutter on
insertion to ensure no accidental contact can be made.
Technical Specifications Third party certified and
tested to comply with:
BS EN 60439-1
BS EN 60439-2
BS 5733 (where applicable) MT
Powertrack is designed to comply with the requirements of BS EN ISO
7671 (17th Edition IEE Wiring Regulations) Note:
Marshall -Tufflex is registered by BSI to BS EN ISO 9001:2008 and to
BS EN ISO 14001:2004 SERIES 507 Powertrack
Dimensions
Click here for printable PDF of this page
Request information
Marshall-Tufflex Electrical cable management antimicrobial trunking
underfloor power distribution LSOH conduit cable basket tray
Technical information associated with:
Marshall-Tufflex Ltd - Data & Power Cabling Management Systems
|
