Electropatent International - Underfloor Floor Boxes Specifications

Underfloor Floor Boxes Standards - Specifications - Dimensions

Technical Specification IP67 Floor Box

Standards

Complies with the relevant clauses of BS 5733 and IEC 60529.

Approvals

GOST-R (Russia) (with Schuko sockets).

IP Classification

When sealed: IP67.
When services connected: IP40.

Component Specifications Frame, Tile Tray & Day-time Lid

2.0mm stainless steel Frame external dimensions: 346mm x 221mm; depth variable to suit the tile insert.

Load Plate

4.0mm stainless steel.

IP67 Sealing Gasket

Nitrile/ PVC closed cell sponged rubber.

Foam Strips in Day-time Lid

Material: Polyester based polyurethane foam CFS 32 UFR. Flame Retardant to HF-1 (UL94). Colour: Dark Grey.

Back Boxes

1.2mm mild steel, galvanised to BS EN 10142. Cable entry in back box: Ø20.5mm and Ø25.5mm knockouts. Alternative entry apertures available on request (to suit trunking).

Accessory Plates

Material: 1.2mm Plastic coated Zintec mild steel. Colour: Goosewing Grey. Full range of power and data accessory plates available.

Technical Specification Boardroom & Hotel Room Modules

Standards

Complies with the relevant clauses of BS 5733.

IP Classification

IP40.

Component Specifications Face Plate

1.2mm or 1.5mm brushed stainless steel. Dimensions: Variable to suit the number of accessories, aperture in table.

Back Boxes

1.2mm mild steel, galvanised to BS EN 10142. Cable entry in back box: Ø20.5mm and Ø25.5mm knockouts. Alternative entry apertures available on request (to suit trunking). Full range accessories available for power, data and audio visual connections.

Pre-wired Options:

Powerfloor tap-offs (Other manufacturers’ tap-offs on request). Flexible cable with either, BS1363 plug, Wieland connector, Harting connector, or IEC 60309-2 Industrial plug. Data leads to Cat5e and audio visual leads including VGA cables.

Supply Connector Options

Wieland ST18 and GST18 (16 Amp); Harting (16 Amp and 32A); Neutrik (32 Amp).