Becker (Sliding Partitions) - Folding Wall Images & Details

Folding Wall - Typical Specifications - Images & Details

Harmonica-in-Vinyl

The Harmonica-in-Vinyl Concertina Partition provides the most economical solution to sub-division of areas.

These partitions are custom made to your requirements. Room layouts can be altered with utmost speed and ease. The Partitions can be supplied either top hung or floor supported.

Features & Benefits

• Quick and easy to operate
• Supplied either top hung or floor supported
• All installations are made to measure
• Virtually no maintenance required
• 4 way meeting, 90° junctions, or T junctions are possible
• Flexible and easily cleaned
• 15, 27 & 35 dB acoustic values
• Pendant pulls for high installations
• Provides the most economical solution to sub-division

Acoustics

Offers four different levels of sound reduction: 15, 24, 30 & 35dB.

Harmonica-in-Vinyl Construction

The Partition comprises an internal steel frame, upholstered with a high quality heavy duty polyvinyl cloth.

The frame consists of a horizontal series of 220mm x 76mm x 1.5mm steel plates, connected vertically with 7mm diameter steel rods. The steel used in manufacture is hot dip galvanized and distortion resistant. The frame is connected to roller assemblies which glide smoothly within a ceiling track.

The frame is upholstered with a fabric-backed polyvinyl cloth which is flexible and easily cleaned. The cloth has a weight of 2600gms per square metre.

To increase acoustic ratings, layers of sound absorbing materials are introduced within the partition e.g. Sheet metal, felt and dense rubberised acoustic mat. The support track, vertical-closing profiles and door furniture are finished in satin anodised aluminium.

Appearance

The durable vinyl is available in a choice of 12 colours. A carpet finish is also possible with a choice of 11 colours.

Fire performance

The Partition can be finished with a flame-retardant polyvinyl.

Installation

Becker offer a full nationwide installation service.

Guarantee

All products are guaranteed against defects in materials or workmanship, for a period of 12 months from the date of installation.

Uno & Duplo

Uno and Duplo partitions are an economic answer to the division of large and small areas. The systems are top hung without the need for floor rails or guides. Both systems are 'tailor-made' to fit thereby avoiding the need to adapt openings to suit standard sizes.

Features & Benefits

• Constructed of high quality dense, ecologically sound chipboard panels
• Top and bottom acoustic sweeps
• Various finishes including melamine, laminate, wood veneers & vinyl
• Economical, quick and easy to use
• Tailor-made to fit - with finger safe hinges

Acoustics

Uno is a non-acoustic room divider.

Duplo offers sound reduction levels of 41 and 43dB.

Operation

• Movement is quick, light and simple. Pushing to fold or park the partition and pulling to extend or close the partition. Final closing compression is achieved with a retracting claw latch fitted to the leading edge of the partition
• The system can be either 'single wing' or 'bi-parting' with two sections meeting in the middle

Construction

Uno is single walled. Duplo is double walled.

• Both are constructed of high quality, dense, ecologically sound chipboard panels finished to suit your requirements
• Extruded P.V.C hinges connect the panels together

Uno

The Uno is available in 3 panel widths:

• Uno 6 -150mm - Uno 8 - 200mm -Uno 12 - 300mm

To achieve acoustic performance the Uno 6A, Uno 8A and Uno 12A are fitted with continuous P.V.C acoustic sweeps to the top and bottom of the hinged panels

Duplo

• The Duplo 66, Duplo 88, and Duplo 122 are constructed from high density particle board panels mutually connected by means of PVC profiled hinges. The system is ‘double shell’ construction and fitted with acoustic sweeps at the head and base
• As the Duplo and Uno are top hung, there is no need for a break in the floor covering. Both are fitted with a euro cylinder lock as standard