Ardex - Solvent Free Epoxy Primers

Pre-levelling Primers - Bonding Agents - Sub Floor Preparation - Solvent Free Epoxy Primers - Product Selector

ARDEX R 90 P Rake & Trowel Heavy Duty Polyurethane Screed

High performance, polyurethane rake and trowel resin flooring system, supplied as four components in pre-measured packs for ease of on site mixing and use. The cured system forms a tough, easily cleaned, pigmented layer from 4mm up to 9mm thick.

Properties

The values shown are typical of results obtained in the laboratory at 20ºC. Actual performance values obtained on site may vary from those quoted.

Physical Properties: @ 20ºC Approximately
Working Life: 15 mins
Light Traffic: 24 hrs
Full Traffic: 48 hrs
Full Chemical Cure: 7 days
Bond Strength: > 1.5 N/mm²
Compressive Strength: 52 N/mm² Flexural Strength: 14 N/mm² Tensile Strength: 6 N/mm²

Abrasion Resistance: Classified ‘Special Duty’ under BS 8204: Part 2: 2002 (9)
Slip Resistance: Classified ‘Satisfactory’ under BS 8204: Part 2: 2002 (9), wet & dry
Impact Resistance: Classified ‘High Impact Resistance’ under BS 8204: Part 1: 1999
Coverage: A 28.9kg pack of ARDEX R 90 P will cover approximately 2.9m² when applied at a thickness of 5mm

Note: These figures are theoretical, due to wastage and the variety and nature of substrates practical coverage figures may be reduced.

Standard Colours:
Green, Grey, Orange, Red, Cream, Yellow

ARDEX R 80 P Heavy Duty Polyurethane Screed

High Performance, polyurethane resin flooring system, supplied as four components in pre-measured packs for ease of on site mixing and use. The cured system forms a tough, easily cleaned, pigmented layer from 4mm up to 12mm thick.

Properties

The value shown are typical of results obtained in the laboratory at 20ºC. Actual performance values obtained on site may vary from those quoted.

Physical Properties: @ 20ºC Approximately
Working Life: 15 mins
Light Traffic: 24 hrs
Full Traffic: 48 hrs
Full Chemical Cure: 7 days
Bond Strength: > 1.5 N/mm²
Compressive Strength: 52 N/mm²
Flexural Strength: 14 N/mm²
Tensile Strength: 6 N/mm²

Abrasion Resistance: Classified ‘Special Duty’ under BS 8204: Part 2: 2002 (9)
Slip Resistance: Classified ‘Satisfactory’ under BS 8204: Part 2: 2002 (9), wet & dry
Impact Resistance: Classified ‘High Impact Resistance’ under BS 8204: Part 1: 1999
Coverage: A 30.7kg pack of ARDEX R 80 P Heavy Duty Polyurethane Screed will cover approximately 2.9m² when applied at a thickness of 5mm

Note: These figures are theoretical, due to wastage and the variety and nature of substrates practical coverage figures may be reduced.

Standard Colours:
Green, Grey, Orange, Red, Cream, Yellow

ARDEX R 70 P Medium Duty Polyurethane Screed

High performance, polyurethane resin flooring system, supplied as four components in pre-measured packs for ease of on site mixing and use. The cured system forms a tough, easily cleaned, pigmented layer from 2mm up to 5mm thick.

Properties

The values shown are typical of results obtained in the laboratory at 20ºC. Actual performance values obtained on site may vary from those quoted.

Physical Properties: @ 20ºC Approximately
Working Life: 15 mins
Light Traffic: 24 hrs
Full Traffic: 48 hrs
Full Chemical Cure: 7 days
Bond Strength: > 1.5 N/mm²
Compressive Strength: 48 N/mm²
Flexural Strength: 20 N/mm²
Tensile Strength: 7 N/mm²

Abrasion Resistance: Classified ‘Special Duty’ under BS 8204: Part 2: 2002 (9)
Slip Resistance: Classified ‘Satisfactory’ under BS 8204: Part 2: 2002 (9), wet & dry
Impact Resistance: Classified ‘High Impact Resistance@ under BS 8204: Part 1: 1999
Coverage: A 20kg pack of ARDEX R 70 P Medium Duty Polyurethane Screed will cover approximately 5m² when applied at a thickness of 2mm

Note: These figures are theoretical, due to wastage and the variety and nature of substrates practical coverage figures may be reduced.

Standard Colours:
Green, Grey, Orange, Red, Cream, Yellow